BACK
Sensitive dimmer module
with combination
330 W
master Code x9101 to 29 / eslave Code x2101 to 29
(Manufactured for any lines and colors in the market).
127 Volt
Function:
- It allows turning on/off or adjusting the lighting intensity of one on more lamps. These functions can be performed from asensitive master module
( Code x9101/29 ) or from any slave module ( Code x2101/29 ) connected to the sensitive master module.
- Suitable for controlling the lighting level at home, office, study facilities, etc. replacing the currentlight switch, it can be done from different places
( in combination ).
Operation:
- The light is on or off by touching slightly the front sensor or any slave sensor. The lighting intensity changes (it increases or decreases ) as the contact extends, which enables to fix the intensity at the desired level.
- Since is has a built - in memory, every time the light is on, the level of intensity is the same it had when it was turned off.
Installation:
- The master module as well as the slave modules should be installed in different embedded light switch frameworks, each taking up the place of a module.
- Up to 7 slave modules operation can be installed.
- Since there is polarity, if they do not operate well, the suppy polarity should be changed to 127 V ~.
- To be used indoors only.
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off. 
Combinated wiring diagrams:
Simple wiring diagrams:
Technical features:
  
  • Supply voltage: 127 V 50 - 60 Hz.
• It has radiofrequency filter to reduce interferences in communication, audio and tv equipment.
• Oulet to triac.
• class II device
• Indoore use
• Master`s weigth: 30 gr.  
• Eslave`s weigth: 20 gr.
Warning
• Do not use with:
- Fluorescent tube.
- Dichroic lamps with no dimming
electronictransformer.
- Energy - efficient lamps.
- Discharge lamps.
- Mixer lamps.
Maximum and minimum power per model and load type:
Another presentation and model:  
WITH PLATE AND FRAME
Master Code x9127
Eslave Code x2127
SEMI - ASSEMBLED (OEM)
Master Code x9125
Eslave Code x2125
CIRCUIT
Master Code x9129
Eslave Code x2129
Downloads: