 |
|||||||
| Timer
module 1700 W |
|||||||
| 3-cable |
|||||||
| Code
x8901 to
29 |
|||||||
| (Manufactured
for different lines and colors in the market.) |
|||||||
| 127 Volt | |||||||
 |
|||||||
| Function: | |||||||
| -
It allows keeping ligthtingset, from an adjustable time on by pressing
a standard auxiliary switch. - Suitable for the light control of corridors, stairways, parking space and any other place, where requiered for manual ignition and timedturning - off purposes.It is also used to control the supply of any appliance that may comply with the technical characteristics of this unit. |
|||||||
| Operation: | |||||||
| - It is operated by pressing manually the standard auxiliary switch, then timing turns off automatic. | |||||||
| Installation: | |||||||
| -
To be installed in a ligth switch framework, assembled into an embedded
rectangular box compatible with the model acquired. It takes up the place of a module. - Then some standard switches are conected in parallel to the unit, so as to operate as auxiliary switches. - To be used indoors only. - After the installation, start time should be adjusted with the corresponding preset controls located in its bottom. - Before carrying out the installation,the general electric power switch of the entire premises must be shut off. |
|||||||
| Wiring diagrams: | |||||||
 |
|||||||
| Technical
features: |
Maximum
power per load type: |
||||||
| •
Supply voltage: 127 V 
50 - 60 Hz.• Timing: adjustable with in 1 minute 
20% to 5 minutes
20%.• Oulet to Relay. • class II device  •- Indoore use  • Weigth: 30 gr. |
 |
||||||
| Another presentation and model: | |||||||
|
|||||||
| Downloads: | |||||||
| |
|||||||
