| Barrier
Motion Detection Module ( Suitable for any loads ) |
||||
| Code
x8301 to 29 |
||||
| 127 Volt | ||||
 |
||||
| Function: | ||||
| -
It allows to detect people`s motion within an reduced area and to close
the circuit for some ime ( to be adjusted ), and open in later.. - Suitable to be used in access spots at stores and in any place where requiered by the automatic ignition for motion detection or in a reduced access erea ( like a barrier ) or where requiered for turning-off purposes. |
||||
| Operation: | ||||
| -Fully automatic operation. | ||||
| Installation: | ||||
| -To
beinstalled in alight switch framework, assembled into an embedded rectangular
box compatible with the model acquired. It takes up the places of a
module. -To be used indoors only. Do not install in exposed places with high airflows. Installation must be such that displacement of poeople is cross-sectional to rays of detection area. - After its setting, time desired to be on must be adjusted through back presets, after each detection, turning to button 
or 
.Level of ambient dark wich it begins to operate, means turning towards"
" symbol. For operating only in dark environments, or towards the
symbol " 
" so that it operates in illuminated and dark environments.-Before carrying out the installation,the general electric power switch of the entire premises must be shut off. |
||||
| Wiring diagrams: | ||||
|
|
||||
| Maximum power per load type: | Technical
features: |
|||
 |
•
Supply voltage: 127 V 
50 - 60 Hz.• Maximum range:4,5 meters (to 20º C) • Detection angle: 30º ( horizontal and vertical ) • Close time: 2 to 5 seg. • Oulet to Relay. • class II device  • Indoore use  • Weigth: 35 gr. |
|||
|
||||
 |
||||
| Important: The maximum range is calculated considering the detection area transversely. | ||||
| Downloads: |
||||
|---|---|---|---|---|
|
||||
