BACK
Dimmer unit to switch
with combination
200 W
master Code x5901 to 29 / eslave Code x6901 to 29
127 Volt
Function: 
- It allows turning on/off or adjusting the lighting intensity of one or more lamps. These functions can be performed from the master module ( code 5901 to 29 ) to the switch or from any other slave module ( code 6901 to 29 ) to the switch where it is connected.
- Suitable for controlling the lighting level at home, office, study facilities, etc, replacing the current light switch. It can be done from different places
( in conbination ).
Operation: 
- The lihgt is on or off by touching slightly the front switch or any slave switch. The lighting intensity changes ( it increases or decreases ) as the contact extends, which enables to fix the intensity at the desired level.
- Since it has a built - in memory, every time the light is on, the level of intensity is the same it had when it was turned off.
Installation: 
- The master module as well as the slave modules should be installed in different embedded light switch frameworks, each taking up the place of a module.
- Up to 7 slave modules operation can be installed.
- Since there is polarity, if they do not operate well, the supply polarity should be changed to 220 V ~.
- To be used indoors only.
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
Combined connection:
Simple connection:
Maximum and minimum power per model and load type:
Technical features:
  
• Supply voltage: 127 V 50 - 60 Hz. 
• It has radiofrequency filter to reduce interferences in communication, audio and tv equipment.
• Oulet to triac.
• class II device
• Indoore use
• Weigth master: 30 gr.
• Weigth slave: 20 gr.
Warning
• Do not use with:
- Fluorescent tube.
- Dichroic lamps with not dimming
electronictransformer.
- Energy - efficient lamps.
- Discharge lamps.
-Mixer lamps.
Another presentation and model: 
WITH PLATE AND FRAME
Master Code x5927
Eslave Code x6927
SEMI - ASSEMBLED (OEM)
Master Code x5925
Eslave Code x5925
CIRCUIT
Master Code x5929
Eslave Code x5929
Other uses:
Downloads: