BACK
2 - cable Corridor Timer
200 W
Code x0905
127 Volt
Function:
- It allows keeping ligthtingset, from an adjustable time on by pressing a standard auxiliary switch.
- Suitable for the light control of corridors, stairways, parking space and any other place, where requiered for manual ignition and timedturning - off purposes.It is also used to control the supply of any appliance that may comply with the technical characteristics of this unit.
Operation:
- It is operated by pressing manually the standard auxiliary switch (the same or another one), then timing turns off automatic.
Installation:
- Should be embedded into a 5 x 10 cm Box.
- Ordinary switches can be installed in parallel to operate as auxiliary switches.
- To be used indoors only.
-- After the installation, ignition time should be adjusted by an easily accesible preset devices.
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
Wiring diagrams:
Warning
• Do not use with:
-Fluorescent tube.
- Dichroic lamps with dimming
electronictransformer.
- Energy - efficient lamps.
- Discharge lamps.
- Mixer lamps.
Technical features:
Maximum power per model and load type:
• Supply voltage: 127 V 50 - 60 Hz.
• Timing: adjustable with in 1,6 30% minutes to 6 30% minutes.
• Oulet to Relay.
• class II device
•- Indoore use
• Weigth: 200 gr.
• To control higher power a higher power unit should be used.
(To see Code ex0907).
Downloads: