Universal
Photocontrol
with positionable sensor
1700 W
with positionable sensor
1700 W
Code
0127
127
Volt
(Suitable for any lamps)
Dimensión
fotocontrol:
- The model with sensivity regulation allows adjusting at will the level of ambiance light (dusk).
- Suitable for use out of the dwelling house, in windows-shops, shelters, posters, signs, public way,aquares, factories.
Operation:
Installation:
- Install the fotocontrol inside or outside the luminous artefact to be
controlled, and the sensor anywhere you want, preventing that its light
affects itself.
- It can be installed outdoors but vertically ( if not outdoors, it can be installed in any position).
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
- If its necesessary a longer sensor conection, be care about the sensor polarity, connect both inside wires with your corresponding colours.
- It can be installed outdoors but vertically ( if not outdoors, it can be installed in any position).
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
- If its necesessary a longer sensor conection, be care about the sensor polarity, connect both inside wires with your corresponding colours.
Maximum
power per load type:
•
Supply voltage: 127 V 
50 - 60 Hz.
• Relay ouput.
• class II device
• outdoor use
• IP 44.
• Weigth: 40 gr.
50 - 60 Hz.• Relay ouput.
• class II device
• outdoor use
• IP 44.
• Weigth: 40 gr.
| Warning   |
| • The light from any light appliance should be prevented from coming into contact with the photocontrol. |
Wiring
diagrams:
Downloads: