BACK
Universal
photocontrol
1700 W
1700 W
Code
x0109
(Suitable
for any lamps)
-Suitable for use out of the dwelling house, in windows-shops, shelters, posters, signs, public way,aquares, factories.
Installation:
- Install within the proximity of the appliance to be controlled, but
preventing the light from coming into contact with the photocontrol.
- It can be installed outdoors but vertically ( if not outdoors, it can be installed in any position).
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
- It can be installed outdoors but vertically ( if not outdoors, it can be installed in any position).
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
Technical
features:
•
Supply voltage: 127 V 
50 - 60 Hz.
• Relay ouput.
• class II device
• outdoor use
• IP 44
• Weigth: 65 gr.
50 - 60 Hz.• Relay ouput.
• class II device
• outdoor use
• IP 44
• Weigth: 65 gr.
| Warning   |
| • The light from any light appliance should be prevented from coming into contact with the photocontrol. |
-
To control higher power a contactor should be used,
with a photocontrol to supply the reel of the contactor.
with a photocontrol to supply the reel of the contactor.
Downloads:
| Download all the catalogue |
|---|