BACK
Universal Photocontrol
1700 W
Code x0103
(Suitable for any lamps)
127 Volt
Function: 
-It allows turning on a light appliance automatically and turning it off at dawn.
-Suitable for use out of the dwelling house, in windows-shops, shelters, posters, signs, public way,aquares, factories.
Operation: 
-Fully automatic operation.
Installation: 
- Install within the proximity of the appliance to be controlled, but preventing the light from coming into contact with the photocontrol.
- It can be installed outdoors but vertically ( if not outdoors, it can be installed in any position).
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
Maximum power per load type: 
• To control higher power a contactor should be used, with a protector to supply the reel of the contactor.
 
Wiring diagrams:

Technical features:
  
  • Supply voltage: 127 V 50 - 60 Hz.
• Relay ouput.
• class II device
• outdoor use
• IP 44
• Weigth: 46 gr. 
Warning
• The light from any light appliance should be prevented from coming into contact with the photocontrol.
Downloads: