BACK
Secuencer for 24 Vdc- Vac
(4 channel)
Code u2715
by light code 2717
Function:
-It allows ignition, intermittently and sequentially of up to 4 ( special ) lights per channel, the sequence frecuency can be regulated.
-Suitable for street signallig, sings, shop windows,etc.
Operation:
- To regulate the sequence frecuency, turn the front knob.
Installation:
-It ca be installed outdoors this the secuencer like the lights but vertically ( if not outdoors, It can be installed in any position). 
-Connect the lights caring about the cable colors, since they have polarity.
-16 lights can be connected in all at most ( up to 4 lights in parallel for each output ).
- It can be used with direct current ( with polarity ) or with alternate current ( without polarity ).
Wiring diagrams:
Características Técnicas:
Warning
It can only be connected to the light sequencers
( special ) code 2717, and not to any other type of light appliance.
- Supply voltage: 24 V = ( with polarity ) or 24 V ~
( without polarity).
- Maximum rated: 600 mA.
( Connecting to 4 lights per oulet).
- Sequence frequency: 0.4 Hz 10 % (aproximately 1 sequence per 2,5 seconds ) to 14 Hz 10 % (aproximately 14 secuences per second).
-Capacity: 4 channels of up to 4 ligths each one. ( total 16 lights ).
-Color of the light sent out: Red.
-IP 44.
- Outdoor use
• Weigth: 56 gr.
Downloads: