BACK
Universal motion detector
module
with 12 Vdc-Vac

3 A
Code s5551 to 73
Function:
- It allows to detect people`s motion within an area and to close the circuit for some time ( to be adjusted ), and open in later.
- To apply in installations that supply 12 V permanent or alternate voltage.
-It also allows to adjust, though an ambiance light intensity detector, the ambiance light threshold requiered.
-Suitable for the light control by corridors, stairs, garage, bath, etc, and where requiered by any other ambit for automatic opening for motion detection and timed closing purposes.It is also used to control the supply of any appliance that may comply with the technical characteristics of this unit.
Operation:
-Fully automatic operation.
Instalación:
-To beinstalled in alight switch framework, assembled into an embedded rectangular box compatible with the model acquired. It takes up the places of a one module.
-To be used indoors only.
-After the instalation, ignition time and ambiance light sensitivity should be adjusted with the corresponding preset device.
-Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
Wiring diagrams:

Horizontal Vertical

Important: The maximum range is calculated considering the detection area transversely.
Technical features:
Warning
-Not to installin exposed places to important airflows, near sourses of heat or of cold.
Maximum power per load type:
• Supply voltage:12V - 50 Hz to 12V .
• Maximum range: 6 meters (to 20º C)
• Detection angle: 140º ( horizontal ) 70º ( vertical ).
• On time: de 7,5 seg. 40 % to 6,5 min 40 %.
• Operation by ambiance light: de 0,1 a 6.000 lux.
• Oulet to Relay.
• class II device
• Indoore use
• Weigth: 35 gr.
Downloads:
Download all the catalogue