BACK
Photocontrol with 12 Vdc
120 W
Code s0105
(Suitable for any 12 V dc lamps)
Function: 
-It allows turning on a light appliance automatically and turning it off at dawn.
-Suitable for use in motorhome, boat, beacon.
Operation: 
-Fully automatic operation.
Installation:
- Install within the proximity of the appliance to be controlled, but preventing the light from coming into contact with the photocontrol.
- It can be installed outdoors but vertically ( if not outdoors, it can be installed in any position).
Wiring diagrams:
Technical features:
  

• Supply voltage: 12 V direct current
• Maximum power: 120 W (with resistive load)
• Relay ouput.
• class II device
• outdoor use
• IP 44
• Weigth: 45 gr. 

Warning
• To be used only in continuos current 12 V circuits.
• The light from any light appliance should be prevented from coming into contact with the fotocontrol.
Maximum power per load type: 


Note:

.The light appliance should be kept away
from moisture and insects.
Downloads:
Download this page
Download all the catalogue 
<<< Above