| corridor
timer module 3 - cable |
||||||||
| Code
8501 to 29 |
||||||||
(Manufactured
for different lines and colors in the market.) |
||||||||
| 220
Volt |
||||||||
 |
||||||||
| Function: | ||||||||
| -
It allows keeping ligthtingset, from an adjustable time on by pressing
a standard auxiliary switch. - Suitable for the light control of corridors, stairways, parking space and any other place, where requiered for manual ignition and timedturning - off purposes.It is also used to control the supply of any appliance that may comply with the technical characteristics of this unit. |
||||||||
| Operation: | ||||||||
| - It is operated by pressing manually the standard auxiliary switch, then timing turns off automatic. | ||||||||
| Installation: | ||||||||
| -
To be installed in a ligth switch framework, assembled into an embedded
rectangular box compatible with the model acquired. It takes up the place of a module. - Then some standard switches are conected in parallel to the unit, so as to operate as auxiliary switches. - To be used indoors only. - After the installation, ignition time should be adjusted with the corresponding preset devices. - Before carrying out the installation,the general electric power switch of the entire premises must be shut off. |
||||||||
| Wiring diagrams: | ||||||||
 |
||||||||
| Technical
features: |
||||||||
| •
Supply voltage: 220 V 
50 - 60 Hz.• Timing: adjustable with in 1 minute 
20% to 5,5 minutes
20%.• Oulet to Relay. • class II device  •- Indoore use  • Weigth: 30 gr. |
||||||||
| Another presentation and model: | ||||||||
|
||||||||
| Maximum power per model and load type: |
|
|||||||
 |
||||||||
| Downloads: | ||||||||
| |
||||||||
