BACK
Sensitive dimmer module
without tact sensor.

(with combination)
300 W
master Code 7301 to 29 / eslave Code 7501 to 29
220 Volt
Function:  
- It allows turning on/off or adjusting the lighting intensity of one or more lamps, by touching the front switch of the module.These functions can be performed from the master module ( Code 7301 to 29 ) to the dimmer or from any other slave module ( Code 7501 to 29 ) to the dimmer where it is connected.
- Suitable for controlling the lighting level at home, office, study facilities, etc, replacing the current light switch. It can be done from different places
( in conbination ), and no mechanical motion around convenient.
Operation:  
- The light is on or off by touching slightly the front switch or any slave switch. The lighting intensity changes ( it increases or decreases ) as the contact extends, which enables to fix the intensity at the desired level.
- Since it has a built-in memory, every time the light is on, the level of intensity is the same it had when it was turned off.
Installation:  
- The master module as well as the slave modules should be installed in different embedded light switch frameworks, assembled into an embedded rectangular box compatible with the model acquired. Each taking up the place of a module.
- Up to 7 slave modules operation can be installed.
- Since there is polarity, if they do not operate well, the supply polarity should be changed to 220 V ~.
- To be used indoors only.
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
Combined connection:
Simple connection:
Technical features:
• Supply voltage: 220 V 50 - 60 Hz. 
• It has radiofrequency filter
to reduce interferences in communication,
audio and tv equipment.
• Oulet to triac.
• class II device
• Indoore use
• Weigth master: 30 gr.

• Weigth slave: 25 gr.

Warning
• Do not use with:
- Fluorescent tube.
- Dichroic lamps with not dimming
electronictransformer.

- Energy - efficient lamps.
- Discharge lamps.

-Mixer lamps.
Another presentation and model: 
WITH PLATE AND FRAME
Master Code 7327
Eslave Code 7527
SEMI - ASSEMBLED (OEM)
Master Code 7325
Eslave Code 7525
CIRCUIT
Master Code 7329
Eslave Code 7529
Maximum and minimum power per model and load type:
Downloads: