| Universal
motion detector module 3 A |
|||||||||
| Code
5501 to 29 |
|||||||||
| 220 Volt | |||||||||
 |
|||||||||
| Function: | |||||||||
| -It
allows to detect people`s motion within an area and ignition the one or
more lamps, for some time ( to be ajusted ), and close in later. -It also allows to adjust, though an ambiance light intensity detector, the ambiance light threshold requiered. -Suitable for the light control by corridors, stairs, garage, bath, etc, and where requiered by any other ambit for automatic opening for motion detection and timed closing purposes. - Appropiate to be used in replacement of tact switches of an existing Stair Timer. It is also used to control the supply of any appliance that may comply with the technical characteristics of this unit. |
|||||||||
| Operation: | |||||||||
| -Fully automatic operation. | |||||||||
| Installation: | |||||||||
| -To
beinstalled in alight switch framework, assembled into an embedded rectangular
box compatible with the model acquired. It takes up the places of a
module. -To be used indoors only. Do not install in places exposed to big draughts. - After its setting, time desired to be on must be adjusted through back presets, after each detection, turning to button 
or 
.Level of ambient dark wich it begins to operate, means turning towards"
" symbol. For operating only in dark environments, or towards the
symbol " 
" so that it operates in illuminated and dark environments.-Before carrying out the installation,the general electric power switch of the entire premises must be shut off. |
|||||||||
| Wiring diagrams: | |||||||||
| In
replacement of a stairs timer switch: |
|||||||||
 |
|||||||||
| Simple connection: | |||||||||
 |
|||||||||
| Automatic or permanent connection: | |||||||||
 |
|||||||||
| In conbinnation or shunt: | |||||||||
 |
|||||||||
| Detection area: | |||||||||
Important:
The maximum range
is calculated considering the detection area transversely. |
|||||||||
| Another presentation and model: | |||||||||
|
|||||||||
| Technical
features: |
Maximum
power per load type: |
||||||||
|
• Supply voltage: 220 V 
50 - 60 Hz.• Maximum range: 6 meters (to 20º C) • Detection angle: 140º ( horizontal ) 70º ( vertical ). • On time: de 7,5 seg. 
40 % to 6,5 min
40 %.• Operation by ambiance light: de 0,1 a 6.000 lux. • Oulet to Relay. • class II device  • Indoore use  • Weigth: 35 gr. |
 |
||||||||
|
|||||||||
Other
uses:
 |
|||||||||
| Downloads: | |||||||||
|
|||||||||
