BACK
Multiple combination
switch module
660 W
Code 2751 to 79
220 Volt
Function:
- It allows turning on/off the ligthting set, by the operation of a switch connected to it. several switches can be conected in different boxes, all of which actime in the same way in the lighting set.
- Suitable for use as a convination switch from different spots, by a simple installation.
Operation:
- By pressing any of the switches connected, the lighting set turns on or off ( alternatively ).
Installation:
- To be installed in a light switch framework, assembled into an embedded rectangular box compatible with the model acquired. It takes up the place of a module.
- Install switches ( standard ) in the spots from where operation may be requiered.
- To be used indoors only.
- Before carrying out the installation, the general electric power switch of the entire premises must be shut off.
Wiring diagrams:
Another presentation and model: 
WITH PLATE AND FRAME
Code 2777
SEMI - ASSEMBLED (OEM)
Code 2775
CIRCUIT
Code 2779
Maximum and minimum power per load type:
 Technical features:   

• Supply voltage: 220 V 50 - 60 Hz.
• Oulet to Relay.
• class II device
• Indoore use
• Weigth: 30 gr.

Warning
• Do not use with:
- Discharge lamps.
- Mixer lamps.
-Fluorescent tube with electronic ballast.

To control higher power a contactor should be used,
with a multiple convination switch to supply the reel of the contactor.
Other uses:
Downloads:
Download all the catalogue