BACK
Multirange Timer
Code 0925
220 Volt
Function:

- Designed to uses like signalization, conmutation, industry automation, etc. Through an inverse contactor. It has six programmable ranges of temporization.
- By having three exit free contacts ( NC 1, NA 1 and C1 ) it can be used for direct actionning or delay actionning of the load. It has an aditional contact ( C2 , NC2 ) working in auxiliar mode, simultaneously with the temporizer feed.

Operation:
- Range election is made through a selector key situated in the front, whose values are indicated in the following table:
Position
0
1
2
3
4
5
6
7
Range
Off
0.15 s.
to
6 s.
1.5 s.
to
60 s.
0.15 m.
to
6 m.
1.5 m.
to
60 m.
0.15 h.
to
6 h.
1.5 h.
to
60 h.
Infinity
- Once the desired range programmed, the time is regulated through the potenciometer situated in the front.
- Feed tension is provided and the programmed temporization is running automatically since this moment. Active exit is indicated through two leds in the front ( red: Normal close; Green: Normal open ).
Installation:
- To be installed in a box having rail DIN.
- If superior energies must be protected, it can be made through a contactor, by using the temporizer to feed the coil of this contactor.
- To be used indoors only.
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
load type:
- It can be used with any kind of load.
Wiring diagrams:
Technical features: Maximum and minimum power per load type:
• Supply voltage: 220 V 50 - 60 Hz.
24 V 50 - 60 Hz. / 24 V dc.
24 V
• Maximum power: 2000 W ( with resistive load ) / 1000 VA ( with reactive load ).
• Precision: > 5 %.
• Presicion to repeatibility: 20 miliseconds.
• Oulet to Relay.
• Support: DIN rail.
• class II device
•- Indoore use
Downloads:
Download this page