| 3
- cable Universal Corridor Timer - 10 A |
|||
| Cod.
0915 |
|||
| 220 Volt | |||
 |
|||
| Function: | |||
| -
It allows keeping ligthtingset, from an adjustable time on by pressing
a standard auxiliary switch. - Suitable for the light control of corridors, stairways, parking space and any other place, where requiered for manual ignition and timedturning - off purposes.It is also used to control the supply of any appliance that may comply with the technical characteristics of this unit. |
|||
| Operation: | |||
| - It is operated by pressing manually the standard auxiliary switch, then timing turns off automatic. | |||
| Installation: | |||
| -
Should be embedded into a 5 x 10 cm Box. - Then some standard switches are conected in parallel to the unit, so as to operate as auxiliary switches. - To be used indoors only. - After the installation, ignition time should be adjusted with the corresponding preset devices. - Before carrying out the installation,the general electric power switch of the entire premises must be shut off. |
|||
| Wiring diagrams: | |||
 |
|||
| Technical features: | Maximum
power per load type:
|
||
|
|
 |
||
| Downloads: | |||
| Download this page | Download all the catalogue | ||
50 - 60 Hz.
20% to 5,5 minutes 
