| 2
- cable Corridor Timer 300 W |
||||
| Code
0905 |
||||
| 220 Volt | ||||
 |
||||
| Function: | ||||
| -
It allows keeping ligthtingset, from an adjustable time on by pressing
a standard auxiliary switch. - Suitable for the light control of corridors, stairways, parking space and any other place, where requiered for manual ignition and timedturning - off purposes.It is also used to control the supply of any appliance that may comply with the technical characteristics of this unit. |
||||
| Operation: | ||||
| - It is operated by pressing manually the standard auxiliary switch (the same or another one), then timing turns off automatic. | ||||
| Installation: | ||||
| -
Should be embedded into a 5 x 10 cm Box. - Ordinary switches can be installed in parallel to operate as auxiliary switches. - To be used indoors only. -- After the installation, ignition time should be adjusted by an easily accesible preset devices. - Before carrying out the installation,the general electric power switch of the entire premises must be shut off. |
||||
| Wiring diagrams: | ||||
 |
||||
|
||||
| Technical
features: |
Maximum power per model and load type: | |||
| •
Supply voltage: 220 V 
50 - 60 Hz.• Timing: adjustable with in 1,6 
30% minutes to 6
30% minutes.• Oulet to Relay. • class II device  •- Indoore use  • Weigth: 200 gr. • To control higher power a higher power unit should be used. (To see Code e0907). |
 |
|||
| Downloads: | ||||
|
||||
