BACK
Tubular Dimmer 400 W
Code 0381
(Light equipment spares)
220 Volt
	Dimension:
Function:
- It allows adjusting the lighting intensity of one or more lamps,from the "off" position to the highest lighting level. - Being tubular - shaped, it is convenient to be installed in the cylindrical framework of the froor lamps.
Operation:
- To adjust the lighting intensity, turn the front knob.
Installation:
- Install in the framework of the appliance, so that only the potemtiometer axis where the knob will be inserted can be seen from outside. - To be used indoors only. - Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
Wiring diagrams:
Technical features:	Maximum and minimum power per load type:
• Supply voltage: 220 V 50 - 60 Hz.  • It has a cut switch in the potentiometer. • Oulet to triac. • class II device • Indoore use • Weigth: 40 gr.		Warning • Do not use with: - Fluorescent tube. - Dichroic lamps with dimming electronictransformer. - Energy - efficient lamps. - Discharge lamps. - Mixer lamps.
Downloads:
Download this page	Download all the catalogue	<<< Above