e0353to60

Power Dimmers

for embedding 1500 W Code 0353
for DIN rail 1500 W Code 0354
for DIN rail 2500 W Code 0357
for DIN rail 3000 W Code 0359
for DIN rail 5000 W Code 0360

220 Volt


Code 0353	Code 0354	Code 0357	Code 0359/60


Code 0353	Code 0354

Code 0357	Code 0359/60

Function:

- It allows adjusting the lighting intensity of one or more lamps,from the "off" position to the highest lighting level.
- Appropiate to control lightning sets, halls installations, audiences, studies,etc.

Operation:

- To change the lighting intensity, turn the front knob.( The knob control can be required separate from the module, to be assembled into a panel.

Installation:

- Model code 0353 is to be embedded into a 5 x 10 cm. box. The other models should beused with boxes with DIN rail.
- To be used indoors only.
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.

Wiring diagrams:

Technical features:

• Supply voltage: 220 V

50 - 60 Hz.
• It has a cut switch in the potentiometer.
• Oulet to triac.
• class II device

• Indoore use

• Weigth:

Code 0353: 110 gr.

Code 0354: 130 gr.

Code 3757: 160 gr.

Code 0359 and 0360: 300 gr.

Warning

• Do not use with:
- Fluorescent tube.
- Dichroic lamps with dimming
electronictransformer.
- Energy - efficient lamps.
- Discharge lamps.
-Mixer lamps.

Another presentation and model:

POWER DIMMER WITH SEPARATE CONTROL 1500 W Code 0354/03	POWER DIMMER WITH SEPARATE CONTROL 2500 W Code 0357/03	POWER DIMMER WITH SEPARATE CONTROL - 3000 W Code 0359/03 - 5000 W Code 0360/03

Maximum and minimum power per model and load type:

Downloads:

Download this page

Download all the catalogue

<<< Above