Universal
Photocontrol
with sensitivity regulation
1000 W
with sensitivity regulation
1000 W
Code
0119
(Suitable for any lamps)
- The model with sensivity regulation allows adjusting at will the level of ambiance light (dusk).
- Suitable for use out of the dwelling house, in windows-shops, shelters, posters, signs, public way,aquares, factories.
Operation:
- Next fully automatic operation.
Installation:
-
Install within the proximity of the appliance to be controlled, but preventing
the light from coming into contact with the photocontrol.
- It can be installed outdoors but vertically ( if not outdoors, it can be installed in any position).
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
- It can be installed outdoors but vertically ( if not outdoors, it can be installed in any position).
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
Maximum
power per load type:
- To control higher power a contactor should be used, with a photocontrol to supply the reel of the contactor.
50 - 60 Hz.• Relay ouput.
• class II device
• outdoor use
• IP 44.
• Weigth: 50 gr.
| Warning   |
| • The light from any light appliance should be prevented from coming into contact with the photocontrol. |
Note:
The light appliance should be kept
away from moisture and insects.
Wiring
diagrams:
Downloads: