BACK

Universal Photocontrol "Victoria"
1000 w
Code 0117
(Suitable for any lamps)
220 Volt
Function: 
-It allows turning on a light appliance automatically and turning it off at dawn.
-Suitable for use out of the dwelling house, in windows-shops, shelters, posters, signs, public way,aquares, factories.
Operation: 
-Fully automatic operation.
Installation: 
- Fit lampholder "Victoria" into same existing device, them the lamp in it.
- The sensor should be fixed so that the light of the appliance does not come into contact with the sensor.
- Do not install outdoors.
- Before carrying out the installation,the general electric power switch of the entire premises must be shut off.
Wiring diagrams:
Maximum power per load type: 
Technical features:  

• Supply voltage: 220 V 50 - 60 Hz.
• Relay ouput.
• class II device
• Indoore use
• Weigth: 80 gr.     
 
Warning
• The light socket do not install outdoors.
• The light from any light appliance should be prevented from coming into contact with the photocontrol.  
Note:
The light appliance should be kept away from moisture and insects.
Downloads:
Download this page
 Download all the catalogue 
<<< Above